WE4M525 GE Terminal Black & Ground Strap
Part #: GEN WE4M525
The GE WE4M525 TERM BLK & GRND STRAP is the perfect solution for all your grounding and bonding needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The GE WE4M525 TERM BLK & GRND STRAP is the perfect solution for all your grounding and bonding needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing the GE WE4M525 Terminal Block and Ground Strap
Instructions
1. Turn off the power to the circuit in which the terminal block will be replaced. Make sure all power is disconnected before attempting any repairs or replacements.
2. Unscrew the two screws that hold the terminal block in place.
3. Remove the two wires that were connected to the old terminal block. One wire will usually be a black wire, and the other will usually be a ground strap.
4. Take the new GE WE4M525 terminal block, and attach the two wires.
5. Securely tighten the two screws that hold the new terminal block in place.
6. Turn the power back on to the circuit and test the new terminal block. If everything goes as expected, you’ve successfully replaced the GE WE4M525 terminal block and ground strap.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
1. Turn off the power to the circuit in which the terminal block will be replaced. Make sure all power is disconnected before attempting any repairs or replacements.
2. Unscrew the two screws that hold the terminal block in place.
3. Remove the two wires that were connected to the old terminal block. One wire will usually be a black wire, and the other will usually be a ground strap.
4. Take the new GE WE4M525 terminal block, and attach the two wires.
5. Securely tighten the two screws that hold the new terminal block in place.
6. Turn the power back on to the circuit and test the new terminal block. If everything goes as expected, you’ve successfully replaced the GE WE4M525 terminal block and ground strap.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.