WE25M40 GE Dryer Rear Bearing Kit
GE - Hotpoint - RCA Dryer Rear Drum Bearing Kit. WE25M40● Replaces the WE3X65 white bearing. ● Shoulder of new style shaft bearing is 3/16"● We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.820300 lbs
Dimension : 6.614100 x 5.275500 x 3.267700
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE - Hotpoint - RCA Dryer Rear Drum Bearing Kit. WE25M40● Replaces the WE3X65 white bearing. ● Shoulder of new style shaft bearing is 3/16"● We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.820300 lbs
Dimension : 6.614100 x 5.275500 x 3.267700
Write Your Own Review
Replacing the WE25M40 GE Rear Bearing Kit
1. Unplug the dryer's power cord from the wall outlet or turn off the circuit breaker before beginning any maintenance.
2. Remove the screws that hold the rear panel in place. Pull the panel away to access the bearing plate.
3. Unplug the motor wiring harness from the control assembly and remove the screws holding the bearing plate.
4. Remove the defective bearing plate and replace it with a new WE25M40 GE Rear Bearing Kit.
5. Align the holes in the bearing plate with the support bracket and reinstall the screws.
6. Plug the motor wiring harness back into the control assembly.
7. Replace the rear panel and secure it with the screws.
8. Reconnect the power cord to the wall outlet or turn the circuit breaker on.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the dryer's power cord from the wall outlet or turn off the circuit breaker before beginning any maintenance.
2. Remove the screws that hold the rear panel in place. Pull the panel away to access the bearing plate.
3. Unplug the motor wiring harness from the control assembly and remove the screws holding the bearing plate.
4. Remove the defective bearing plate and replace it with a new WE25M40 GE Rear Bearing Kit.
5. Align the holes in the bearing plate with the support bracket and reinstall the screws.
6. Plug the motor wiring harness back into the control assembly.
7. Replace the rear panel and secure it with the screws.
8. Reconnect the power cord to the wall outlet or turn the circuit breaker on.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
