WE04X25280 GE Washer Dryer Timer
Part #: GEN WE04X25280
Timer works with some GE, and Hotpoint models of clothes dryers.
Timer works with some GE, and Hotpoint models of clothes dryers.
Write Your Own Review
1. Unplug the dryer from the power outlet before starting.
2. Remove the dryer's top panel by unscrewing the two screws located at the back of the dryer.
3. Locate the timer and disconnect the wiring harness by squeezing the tabs on either side of the connector and pulling it off.
4. Unscrew the mounting bracket that holds the timer in place and remove it.
5. Install the new timer and secure it with the mounting bracket.
6. Reconnect the wiring harness by pushing it on until it clicks in place.
7. Replace the top panel and screw it in place.
8. Plug the dryer back into the power outlet and test it.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the dryer's top panel by unscrewing the two screws located at the back of the dryer.
3. Locate the timer and disconnect the wiring harness by squeezing the tabs on either side of the connector and pulling it off.
4. Unscrew the mounting bracket that holds the timer in place and remove it.
5. Install the new timer and secure it with the mounting bracket.
6. Reconnect the wiring harness by pushing it on until it clicks in place.
7. Replace the top panel and screw it in place.
8. Plug the dryer back into the power outlet and test it.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.