Online Sale!
100% Guaranteed Genuine Parts
WE01X30638 GE Control Knob
WE01X30638 GE Control Knob
Weight : 0.049100 lbs
Dimension : 2.204700 x 1.968500 x 1.574800
Compatible Brands
About this product
WE01X30638 GE Control Knob
Weight : 0.049100 lbs
Dimension : 2.204700 x 1.968500 x 1.574800
The following parts are replaced by this product
- WE01X24776
No more associated models for this part.
DIY Instructions for Replacing a GE WE01X30638 Control Knob
Tools Needed:
Small Phillips-head screwdriver
Step 1: Unplug the appliance or turn off the power to the unit at the circuit breaker.
Step 2: Locate the control knob. It is usually located just above the dials, setting buttons, or other control mechanisms. It will have a small metal shaft protruding from its back end.
Step 3: Use the small Phillips-head screwdriver to remove the screws that are holding the knob in place.
Step 4: Carefully pull the knob off of the metal shaft.
Step 5: Take the GE WE01X30638 control knob and line up the two small slots on the back of the knob with the metal shaft.
Step 6: Press the replacement knob onto the metal shaft until it is firmly in place.
Step 7: Secure the new knob to the knob shaft with the Phillips-head screws that were removed in step 2.
Step 8: Plug the appliance back in or turn on the power at the circuit breaker. Test the new knob to ensure it is functioning properly.
Congratulations, you've successfully replaced the GE WE01X30638 control knob!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
Small Phillips-head screwdriver
Step 1: Unplug the appliance or turn off the power to the unit at the circuit breaker.
Step 2: Locate the control knob. It is usually located just above the dials, setting buttons, or other control mechanisms. It will have a small metal shaft protruding from its back end.
Step 3: Use the small Phillips-head screwdriver to remove the screws that are holding the knob in place.
Step 4: Carefully pull the knob off of the metal shaft.
Step 5: Take the GE WE01X30638 control knob and line up the two small slots on the back of the knob with the metal shaft.
Step 6: Press the replacement knob onto the metal shaft until it is firmly in place.
Step 7: Secure the new knob to the knob shaft with the Phillips-head screws that were removed in step 2.
Step 8: Plug the appliance back in or turn on the power at the circuit breaker. Test the new knob to ensure it is functioning properly.
Congratulations, you've successfully replaced the GE WE01X30638 control knob!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review