WD8X181 GE Dishwasher Pump Gasket
The GE WD8X181 Shaft Seal is perfect for your dishwasher. Dishwasher Drain Pump Valve Shaft Seal We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The GE WD8X181 Shaft Seal is perfect for your dishwasher. Dishwasher Drain Pump Valve Shaft Seal We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs
Write Your Own Review
The following parts are replaced by this product
- WD08X0181
1. Unplug the GE dishwasher and shut off the water supply.
2. Remove the lower dishrack and the center support bracket from the dishwasher tub.
3. Disconnect the upper and lower fill hoses from the water inlet valve.
4. Remove the screws that secure the water inlet valve to the dishwasher tub.
5. Carefully pull the water inlet valve away from the dishwasher tub.
6. Remove the old shaft seal, then replace it with the new WD8X181 seal.
7. Place the water inlet valve back onto the dishwasher tub and secure it with the screws.
8. Reconnect the upper and lower fill hoses to the water inlet valve.
9. Place the center support bracket and lower dishrack back in the dishwasher tub.
10. Turn on the water supply and plug the dishwasher back in.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the lower dishrack and the center support bracket from the dishwasher tub.
3. Disconnect the upper and lower fill hoses from the water inlet valve.
4. Remove the screws that secure the water inlet valve to the dishwasher tub.
5. Carefully pull the water inlet valve away from the dishwasher tub.
6. Remove the old shaft seal, then replace it with the new WD8X181 seal.
7. Place the water inlet valve back onto the dishwasher tub and secure it with the screws.
8. Reconnect the upper and lower fill hoses to the water inlet valve.
9. Place the center support bracket and lower dishrack back in the dishwasher tub.
10. Turn on the water supply and plug the dishwasher back in.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
