WD49X24057 GE Replacement Dishwasher Ultra Fine Filter Kit
Ultra fine filter kit works with some GE, and Hotpoint models of dishwashers.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Ultra fine filter kit works with some GE, and Hotpoint models of dishwashers.
Write Your Own Review
The following parts are replaced by this product
- WD12X10416
- WD12X20107
- WD12X21976
- WD12X20549
- WD12X22560
1. Unplug the dishwasher from the wall outlet.
2. Lift and slightly tilt the dishwasher to access the underside of the dishwasher.
3. Locate the existing filter assembly and disconnect the wires.
4. Carefully remove the old filter assembly by unscrewing the screws holding it in place.
5. Wipe down the area to remove any dirt or debris before installing a new filter.
6. Insert the new filter into the dishwasher, ensuring the arrows on the filter point in the same direction as the arrows on the dishwasher.
7. Secure the filter in place with the screws provided.
8. Reattach the wires to the new filter.
9. Press firmly on the filter's edges to ensure a tight seal.
10. Replace the dishwasher in its original position and plug it back into the wall outlet.
11. Run a regular cycle to test the new filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Lift and slightly tilt the dishwasher to access the underside of the dishwasher.
3. Locate the existing filter assembly and disconnect the wires.
4. Carefully remove the old filter assembly by unscrewing the screws holding it in place.
5. Wipe down the area to remove any dirt or debris before installing a new filter.
6. Insert the new filter into the dishwasher, ensuring the arrows on the filter point in the same direction as the arrows on the dishwasher.
7. Secure the filter in place with the screws provided.
8. Reattach the wires to the new filter.
9. Press firmly on the filter's edges to ensure a tight seal.
10. Replace the dishwasher in its original position and plug it back into the wall outlet.
11. Run a regular cycle to test the new filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
