WD34X24429 GE Dishwasher Control Panel
Part #: GEN WD34X24429
The GE WD34X24429 Console Cover Graphic Assembly is custom designed for your appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The GE WD34X24429 Console Cover Graphic Assembly is custom designed for your appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
How to Replace the GE WD34X24429 Console Cover Graphic Assembly
1. Unplug the machine or turn off the power supply before starting any repairs.
2. Remove the console top cover. This is the piece that covers the control board. Depending on the model of your unit, you will either need to remove a few screws or pull up on the console top cover to release the springs underneath.
3. Once the top cover is removed, locate the defective console cover graphic assembly and remove it from the control board.
4. Unpack the new graphic assembly, align the prongs on the assembly with the slots in the board and securely press down on the assembly to ensure complete connection.
5. Re-install the console top cover and secure with the appropriate hardware.
6. Plug in the machine or turn on the power supply.
7. Test the machine to make sure the replacement was successful.
8. If the machine is functioning properly, you have successfully replaced the GE WD34X24429 console cover graphic assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the machine or turn off the power supply before starting any repairs.
2. Remove the console top cover. This is the piece that covers the control board. Depending on the model of your unit, you will either need to remove a few screws or pull up on the console top cover to release the springs underneath.
3. Once the top cover is removed, locate the defective console cover graphic assembly and remove it from the control board.
4. Unpack the new graphic assembly, align the prongs on the assembly with the slots in the board and securely press down on the assembly to ensure complete connection.
5. Re-install the console top cover and secure with the appropriate hardware.
6. Plug in the machine or turn on the power supply.
7. Test the machine to make sure the replacement was successful.
8. If the machine is functioning properly, you have successfully replaced the GE WD34X24429 console cover graphic assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.