WD18X10026 GE Dishwasher Sump Inlet

How to Replace a GE Sump Inlet - A DIY Guide

When it comes to home maintenance, there are few tasks more important – and sometimes daunting – than replacing a sump inlet, such as the WD18X10026 GE Sump Inlet. This home task requires knowledge of basic plumbing and some basic tools, but with the right information and a bit of know-how, anyone can replace a sump inlet like the GE Sump Inlet. Here's a step-by-step guide on how do do it yourself:

1. Turn off the power to the sump pump. Unplug the power cord from the outlet or flip the circuit breaker.

2. Drain the sump basin by disconnecting the outflow pipe from the pump inlet.

3. Remove the old sump inlet by unscrewing the clamp that holds it in place.

4. Lubricate the new GE Sump Inlet and the surface of the sump pump housing where the new inlet will be installed.

5. Affix the new GE Sump Inlet using the screws included in the packaging. Make sure the inlet is securely attached to the pump housing.

6. Connect the outflow pipe to the new inlet and make sure all the pipes are secure with clamps.

7. Place the sump pump back into the basin and fill it with water to test.

8. Turn the power back on and check to make sure the new GE Sump Inlet is working properly.

Replacing a GE Sump Inlet may seem complicated, but with some proper preparation and these simple instructions, you can do it yourself. Replacing the sump inlet regularly will help keep your sump pump working efficiently and safely. With proper upkeep, you can make sure your home is safeguarded against floods and other water damage.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.