WD16X10011 GE Dishwasher Detergent Cup Dispenser Arm
Detergent cup dispenser arm works with some GE, and Hotpoint models of dishwashers.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Detergent cup dispenser arm works with some GE, and Hotpoint models of dishwashers.
Write Your Own Review
The following parts are replaced by this product
- WD16X10005
- WD16X292
- WD16X0292
Replacing the WD16X10011 GE Dishwasher Detergent Cup Dispenser Arm
1. Begin by unplugging your dishwasher from its power source.
2. Carefully pull the dishwasher away from the wall and locate theWD16X10011 Dispenser Arm inside the dishwasher tub.
3. Use a flat-head screwdriver to loosen the two screws at the top of the Dispenser Arm.
4. Remove the screws and gently lift the Dispenser Arm off of its mounting bracket.
5. Replace with a new WD16X10011 Dispenser Arm, lining up the slots on the mounting bracket and the holes on the Dispenser Arm.
6. Secure the Dispenser Arm to the mounting bracket with the two screws.
7. Once secured, test the accuracy of the Dispenser Arm by running a cycle with a detergent tablet in the dishwasher.
8. If the Dispenser Arm is working properly, plug the dishwasher back into its power source and slide it back against the wall.
9. Enjoy your updated dishwasher!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Begin by unplugging your dishwasher from its power source.
2. Carefully pull the dishwasher away from the wall and locate theWD16X10011 Dispenser Arm inside the dishwasher tub.
3. Use a flat-head screwdriver to loosen the two screws at the top of the Dispenser Arm.
4. Remove the screws and gently lift the Dispenser Arm off of its mounting bracket.
5. Replace with a new WD16X10011 Dispenser Arm, lining up the slots on the mounting bracket and the holes on the Dispenser Arm.
6. Secure the Dispenser Arm to the mounting bracket with the two screws.
7. Once secured, test the accuracy of the Dispenser Arm by running a cycle with a detergent tablet in the dishwasher.
8. If the Dispenser Arm is working properly, plug the dishwasher back into its power source and slide it back against the wall.
9. Enjoy your updated dishwasher!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
