WD12X10304 GE Dishwasher Rack Slide Endcap (White)
General Electric - Hotpoint Dishwasher White End Cap Stop for Rack Slide WD12X10304
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric - Hotpoint Dishwasher White End Cap Stop for Rack Slide WD12X10304
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- WD12X344
- WD12X0344
- WD12X0344
1. Turn off the power to the dishwasher. Unplug the power cord from the wall outlet.
2. Open the dishwasher door and remove the upper rack by lifting it off the mounting rails.
3. Remove the remaining screws from the worn slide end caps.
4. Remove the worn slide end caps from the rack.
5. Place the new slide end caps onto the rack.
6. Tighten the screws on the new slide end caps.
7. Place the upper dishwasher rack in its original place, pushing the ends of the rack onto the mounting rails.
8. Plug the power cord back into the wall outlet and turn the power back on.
9. Run a test cycle to ensure the installation was successful.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open the dishwasher door and remove the upper rack by lifting it off the mounting rails.
3. Remove the remaining screws from the worn slide end caps.
4. Remove the worn slide end caps from the rack.
5. Place the new slide end caps onto the rack.
6. Tighten the screws on the new slide end caps.
7. Place the upper dishwasher rack in its original place, pushing the ends of the rack onto the mounting rails.
8. Plug the power cord back into the wall outlet and turn the power back on.
9. Run a test cycle to ensure the installation was successful.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
