WB56X23809 GE Oven Range Door Crystal Window

Replacing the WB56X23809 GE Range Door Crystal Window

Introduction

The WB56X23809 GE range door crystal window can be a great addition to your kitchen, if you need to replace it follow these easy-to-follow instructions.

Tools and Materials Needed

• Screwdriver

• Flathead screwdriver

• Phillips head screwdriver

• WB56X23809 replacement door crystal window

Instructions

1. Unplug the power cord to the range and shut off the gas supply.

2. Use a flathead screwdriver to remove any screws that hold the handle, remove the handle.

3. Use a Philips head screwdriver to remove the screws that hold the metal trim. Pull the trim off.

4. Insert the screwdriver into the slot where the old window was located and pull outward from the center of the slot.

5. Carefully remove the old window frame and discard it.

6. Place the new window frame in the same slot and press until it is flush.

7. Replace the metal trim and screws using the Phillips head screwdriver.

8. Replace the handle and screws, reconnect the power cord and turn the gas supply back on.

9. Test the door window to make sure it is installed correctly.

Conclusion

Replacing the WB56X23809 GE range door crystal window can be a fairly simple process with the right tools and materials. If you follow these instructions, you should have your replacement window installed and ready to go in no time.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.