WB44T10010 GE Oven Range Bake Element
General Electric - Hotpoint Range Oven Bake Element WB44T10010
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
General Electric - Hotpoint Range Oven Bake Element WB44T10010
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Write Your Own Review
Replacing the WB44T10010 GE Range Oven Bake Element
1. Unplug your oven from the wall.
2. Remove the oven racks from the interior of the oven.
3. Remove the access panel on the back of the oven to get to the bake element.
4. Carefully remove the wiring harness from the element.
5. Use a socket wrench to unscrew the mounting screws and remove the old bake element.
6. Install the new bake element in the same spot, and secure it with the screws you removed.
7. Reconnect the wiring harness and replace the access panel.
8. Replace the oven racks and plug the oven back into the wall.
9. Run an oven test cycle to make sure the new bake element is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your oven from the wall.
2. Remove the oven racks from the interior of the oven.
3. Remove the access panel on the back of the oven to get to the bake element.
4. Carefully remove the wiring harness from the element.
5. Use a socket wrench to unscrew the mounting screws and remove the old bake element.
6. Install the new bake element in the same spot, and secure it with the screws you removed.
7. Reconnect the wiring harness and replace the access panel.
8. Replace the oven racks and plug the oven back into the wall.
9. Run an oven test cycle to make sure the new bake element is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
