WB30T10132 GE Oven Stove Radiant Burner
Radiant burner works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Radiant burner works with some GE, Hotpoint, and RCA models of stoves / ovens / ranges.
Write Your Own Review
The following parts are replaced by this product
- WB30T10128
Replacing the WB30T10132 GE Stove Radiant Burner:
1. Unplug your stove from the outlet or switch off the circuit breaker.
2. Remove the stove top and locate the faulty burner.
3. Detach the screws that secure the burner to the stovetop.
4. With a socket wrench, unscrew the two nuts holding the burner in place.
5. Replace the faulty burner with the new WB30T10132 GE Stove Radiant Burner.
6. Reinstall the screws and nuts to secure the new burner.
7. Place the stove top back in its original position.
8. Plug the stove back into the outlet or turn on the circuit breaker.
9. Test the new burner to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your stove from the outlet or switch off the circuit breaker.
2. Remove the stove top and locate the faulty burner.
3. Detach the screws that secure the burner to the stovetop.
4. With a socket wrench, unscrew the two nuts holding the burner in place.
5. Replace the faulty burner with the new WB30T10132 GE Stove Radiant Burner.
6. Reinstall the screws and nuts to secure the new burner.
7. Place the stove top back in its original position.
8. Plug the stove back into the outlet or turn on the circuit breaker.
9. Test the new burner to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
