WB28K10834 GE Oven Orifice

DIY Guide to Replacing the GE WB28K10834 ORIFICE SPUD

Replacing the orifice spud of your GE oven is a simple process that will help maintain your appliance's efficiency and performance. To get started, you'll need:

• A flathead screwdriver
• A Phillips head screwdriver
• A replacement GE WB28K10834 ORIFICE SPUD

Step 1: Turn off the power to your oven before beginning the repair process. You can do this by unplugging the appliance from the wall or turning off the appropriate switch on the main power supply circuit.

Step 2: Remove the screws from the oven’s bottom access panel. Use the flathead or Phillips head screwdriver and unscrew the panel to reveal the orifice spud.

Step 3: Remove the existing orifice spud by hand. Be gentle when removing the spud so as not to damage it.

Step 4: Take your replacement GE WB28K10834 ORIFICE SPUD and carefully insert it into the hole. Ensure that the spud is fitted securely in the hole before moving on to the next step.

Step 5: Once the spud is in place, use the Phillips head screwdriver to reattach the oven’s bottom access panel.

Step 6: Turn on the oven’s power source and test the operation of the appliance by setting the temperature and allowing the oven to heat up.

You have now successfully replaced the GE WB28K10834 Orifice Spud! For best results, perform all maintenance and repairs on your oven regularly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.