WB27X35382 GE Diode

Replacing the GE WB27X35382 Diode-Cable Assembly

DIY instructions on replacing the GE WB27X35382 Diode-Cable Assembly will help you get your oven or range repaired quickly. This is a fairly simple task that requires minimal tools and time.

Tools Needed:

-Medium sized Phillips head screwdriver
-Small slotted screwdriver
-Needle-nose pliers
-Replacement diode-cable assembly

Instructions:

1. Before beginning, ensure that the oven or range is unplugged and all power sources are shut off.

2. Remove the screws from the back panel of the oven or range, using the medium size Phillips head screwdriver.

3. Carefully take off the back panel and move it aside.

4. Locate the diode-cable assembly at the base of the appliance and use the small slotted screwdriver to disconnect the wires from the unit.

5. Place the new diode-cable assembly in its place and attach the wires with needle-nose pliers.

6. Reattach the back panel and secure with the screws.

7. Plug the oven in and turn on the power sources to test the new assembly.

Congratulations! You have successfully replaced the GE WB27X35382 Diode-Cable Assembly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.