WB15X10018 GE Oven Handle
The GE WB15X10018 Door Handle is a perfect replacement for your current worn or broken ovendoor handle. Its durable plastic construction ensures that this product will last through years of use. The simple design makes it easy to install and replace existing handles.We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The GE WB15X10018 Door Handle is a perfect replacement for your current worn or broken ovendoor handle. Its durable plastic construction ensures that this product will last through years of use. The simple design makes it easy to install and replace existing handles.We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing the GE WB15X10018 Handle
1. Gather the tools you need to complete the task: Phillips screwdriver, flat-head screwdriver, needle-nose pliers, and/or adjustable wrench.
2. Carefully remove the handle from the refrigerator door: use the screwdriver to unscrew the mounting screws at the back of the door.
3. Take off the screw located below the handle and pull out the spring clip.
4. Using a pair of needle-nose pliers, disconnect the wiring harness that connects the handle to the electronic control board.
5. Replace the handle on the refrigerator door and secure it with the screws.
6. Reconnect the wiring harness to the electronic control board and secure it with the screw.
7. Finally, slide the spring clip into place and ensure the handle is secure.
Congratulations, you have successfully replaced the GE WB15X10018 Handle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the tools you need to complete the task: Phillips screwdriver, flat-head screwdriver, needle-nose pliers, and/or adjustable wrench.
2. Carefully remove the handle from the refrigerator door: use the screwdriver to unscrew the mounting screws at the back of the door.
3. Take off the screw located below the handle and pull out the spring clip.
4. Using a pair of needle-nose pliers, disconnect the wiring harness that connects the handle to the electronic control board.
5. Replace the handle on the refrigerator door and secure it with the screws.
6. Reconnect the wiring harness to the electronic control board and secure it with the screw.
7. Finally, slide the spring clip into place and ensure the handle is secure.
Congratulations, you have successfully replaced the GE WB15X10018 Handle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
