WB03X10209 GE Oven Control Knob

Replacing the GE WB03X10209 Knob: A Step-by-Step Guide

If your GE stove knob is cracked, broken, or malfunctioning, you don’t need to replace the entire stove. With the right tools, you can easily replace the faulty GE WB03X10209 knob with a new one, saving money and time.

Here’s what you’ll need to get started:

- Replacement GE WB03X10209 stove knob
-Phillips-head screwdriver
-Flat-head screwdriver
-Tweezers
-Small needle-nose pliers

Step 1: Unplug the stove and turn off the circuit breaker.

Step 2: Remove any plastic caps or trim parts that may be on the existing knob.

Step 3: Insert a Phillips-head screwdriver into the screw found in the center of the knob, then loosen and remove the screw.

Step 4: Pull gently on the knob to remove it from the control panel. If it won’t come off, use a flat-head screwdriver to pry it loose.

Step 5: Inspect the back of the stove control panel. Use tweezers or needle-nose pliers to remove the old knob’s metal shaft from the panel.

Step 6: Insert the metal shaft from the new GE WB03X10209 knob into the hole in the control panel.

Step 7: Secure the new knob onto the control panel by tightening the screw in the center of the knob with the Phillips-head screwdriver.

Step 8: Test the new knob to ensure it works.

Step 9: Replace the plastic caps and trim parts if necessary, and plug the stove back in.

Now your GE stove should be working as good as new. Replacing the GE WB03X10209 knob is an easy DIY job that can help extend the life of your stove and save you money down the line.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.