WB02X11491 GE Replacement Grease Filter

Instructions for Replacing a GE WB02X11491 Grease Filter:

1. Prepare the area by turning off the power to the range hood at the circuit breaker.

2. Open up the range hood and locate the filter. It may be on the hood's top, sides, or bottom.

3. Once you have located the filter, remove it by pressing in the tabs or unscrewing it from the body of the range hood.

4. Take the new filter, which should have come with the replacement part kit, and insert it in the same location as the old filter. Make sure it is secure before continuing.

5. Turn the power back on at the circuit breaker and test the filter by running the range hood on a low setting. If the filter works properly, it should filter out any odors or smoke.

6. Check the filter periodically to ensure it is running properly and replace it as needed.


Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.