WB02K10061 GE Oven Drawer Glide

1. Unplug the GE appliance and locate the screws on the sides of the oven which were used during installation.

2. Unscrew these screws and use a flathead screwdriver to gently pry off the trim pieces on either side of the oven.

3. Once the trim pieces are removed, you will be able to access the glider drawer assembly, which is located at the bottom part of the oven.

4. Carefully remove the glider drawer from the assembly by unscrewing the screws and nuts.

5. Now that the glider drawer has been removed, you can start the installation process for the new glider drawer right WB02K10061.

6. Carefully align the glider drawer with the oven and secure it with screws and nuts.

7. Once the glider drawer right is secured in place, plug the appliance back in and replace the trim pieces.

8. Congratulations! You have successfully replaced the glider drawer right on your GE oven.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.