249720P Fisher & Paykel Cooktop Bezel Clip Assembly
Bezel clip assembly works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of s.
Bezel clip assembly works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of s.
Write Your Own Review
DIY: How to Replace a Fisher & Paykel 249720P Cooktop Bezel Clip Assembly
Are you looking to replace your Fisher & Paykel 249720P cooktop bezel clip assembly? If so, this DIY guide is here to help. Follow these easy steps to easily replace the Fisher & Paykel Cooktop Bezel Clip Assembly.
Materials Needed:
- Phillips screwdriver
- Flathead screwdriver
Step One: Unscrew the screws that are holding the bezel onto the control panel with the Phillips screwdriver. Carefully lift the bezel off of the control panel and set it aside.
Step Two: Lift the clips off of the control panel. The old clips will likely have black plastic caps on them. Use a flathead screwdriver to remove the black caps.
Step Three: Take out the old bezel clip assembly and discard it.
Step Four: Insert the new bezel clip assembly into the slot in the control panel. Make sure the clip is properly seated in the panel before continuing.
Step Five: Place the black plastic caps onto the new clip. Make sure they snap into place securely.
Step Six: Place the bezel back onto the control panel and secure it with the Phillips screwdriver.
And that's it! You have replaced your Fisher & Paykel 249720P cooktop bezel clip assembly. Make sure to dispose of the old clips safely and properly. With this DIY guide, you shouldn't have any trouble replacing your Fisher & Paykel Cooktop Bezel Clip Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace your Fisher & Paykel 249720P cooktop bezel clip assembly? If so, this DIY guide is here to help. Follow these easy steps to easily replace the Fisher & Paykel Cooktop Bezel Clip Assembly.
Materials Needed:
- Phillips screwdriver
- Flathead screwdriver
Step One: Unscrew the screws that are holding the bezel onto the control panel with the Phillips screwdriver. Carefully lift the bezel off of the control panel and set it aside.
Step Two: Lift the clips off of the control panel. The old clips will likely have black plastic caps on them. Use a flathead screwdriver to remove the black caps.
Step Three: Take out the old bezel clip assembly and discard it.
Step Four: Insert the new bezel clip assembly into the slot in the control panel. Make sure the clip is properly seated in the panel before continuing.
Step Five: Place the black plastic caps onto the new clip. Make sure they snap into place securely.
Step Six: Place the bezel back onto the control panel and secure it with the Phillips screwdriver.
And that's it! You have replaced your Fisher & Paykel 249720P cooktop bezel clip assembly. Make sure to dispose of the old clips safely and properly. With this DIY guide, you shouldn't have any trouble replacing your Fisher & Paykel Cooktop Bezel Clip Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
