249559P Fisher & Paykel Cooking Seal Bezel Clip Assembly

1. Start by gathering the necessary tools you'll need for the job - a Phillips screwdriver, a flathead screwdriver, and the new Fisher & Paykel 249559P Seal Bezel Clip Stand Dictator.

2. Unplug your dishwasher from its electrical outlet and turn off the water supply to the unit.

3. Find the door panel on your appliance and remove it by unscrewing the screws that are holding it in place. Once these screws are removed, you should be able to lift the panel away from the dishwasher.

4. Carefully pull out the old seal bezel clip stand dictator and disconnect the power cords if necessary.

5. Take your new Fisher & Paykel 249559P Seal Bezel Clip Stand Dictator and hook or attach it to the spaces where the old one was removed.

6. Secure it in place with the Phillips screws provided in the package.

7. Reattach the door panel and secure it to the dishwasher with the screws you removed earlier.

8. Reconnect the power cords and turn the water supply back on.

9. Plug the dishwasher back into its electrical outlet and make sure it is securely connected.

10. Test the new Fisher & Paykel 249559P Seal Bezel Clip Stand Dictator to make sure it is working properly.

Finally, you have successfully replaced the Fisher & Paykel 249559P Seal Bezel Clip Stand Dictator! Make sure to keep track of the extra parts and tools you use in a safe place for future use.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.