Online Sale!
100% Guaranteed Genuine Parts
249519P Fisher & Paykel Cooking Lightpipe Seal Drop-In
249519P Fisher & Paykel Cooking Seal Lightpipe Drop In
Weight : 0.034600 lbs
Dimension : 2.244000 x 1.653500 x 1.299200
Compatible Brands
About this product
249519P Fisher & Paykel Cooking Seal Lightpipe Drop In
Weight : 0.034600 lbs
Dimension : 2.244000 x 1.653500 x 1.299200
No more associated models for this part.
DIY Guide for Replacing the Fisher & Paykel 249519P SEAL LIGHTPIPE DROP IN
Are you looking to replace the Fisher & Paykel 249519P Seal Lightpipe Drop-In on your own? If so, then this guide will provide simple and easy-to-follow step-by-step instructions!
Step 1: Disconnect power to the dishwasher.
Before beginning, the power source must be disconnected from the dishwasher. This ensures the safety of you and your appliance.
Step 2: Locate the seal.
On the front of the dishwasher, there will be a panel that needs to be removed in order to access the seal. Carefully remove the panel.
Step 3: Remove the old seal.
Remove the old seal from the dishwasher using a flathead screwdriver or other prying tool. Be sure to take your time and use caution to avoid scratching or damaging the surrounding area.
Step 4: Inspect the area.
Remove any dust or debris from the area where the seal was located. Then, inspect the area for any visible signs of damage, such as cracks or worn-out material. If needed, replace any broken parts with new ones.
Step 5: Install the new seal.
Carefully place the new seal into the dishwasher and secure it using the provided screws.
Step 6: Reassemble the dishwasher.
Reattach the panel and reconnect the power source.
Step 7: Test and enjoy!
Run a cycle to ensure everything is working properly. If all checks out, then you're done! Enjoy your newly installed Fisher & Paykel 249519P Seal Lightpipe Drop-In.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the Fisher & Paykel 249519P Seal Lightpipe Drop-In on your own? If so, then this guide will provide simple and easy-to-follow step-by-step instructions!
Step 1: Disconnect power to the dishwasher.
Before beginning, the power source must be disconnected from the dishwasher. This ensures the safety of you and your appliance.
Step 2: Locate the seal.
On the front of the dishwasher, there will be a panel that needs to be removed in order to access the seal. Carefully remove the panel.
Step 3: Remove the old seal.
Remove the old seal from the dishwasher using a flathead screwdriver or other prying tool. Be sure to take your time and use caution to avoid scratching or damaging the surrounding area.
Step 4: Inspect the area.
Remove any dust or debris from the area where the seal was located. Then, inspect the area for any visible signs of damage, such as cracks or worn-out material. If needed, replace any broken parts with new ones.
Step 5: Install the new seal.
Carefully place the new seal into the dishwasher and secure it using the provided screws.
Step 6: Reassemble the dishwasher.
Reattach the panel and reconnect the power source.
Step 7: Test and enjoy!
Run a cycle to ensure everything is working properly. If all checks out, then you're done! Enjoy your newly installed Fisher & Paykel 249519P Seal Lightpipe Drop-In.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review