Online Sale!
MP26MA Chromalox Electric Stove Range 8" Top Burner Unit 2600W 240V
Large surface element. Black centre medallion and delta frame support base distinguish this part. 2600 watts of heat and standard plug-in ends mean this burner can be installed on almost any range with similar plug in ends. The delta frame provides a stronger base and helps prevent excessive heat from warping the burner.
● 5 Turn
● 2600 Watts
● 240 Volts
● Delta Bracket
● Black Medallion
● 5 Turn
● 2600 Watts
● 240 Volts
● Delta Bracket
● Black Medallion
Weight : 0.761500 lbs
Dimension : 8.267700 x 5.511800 x 2.322800
Compatible Brands
About this product
Large surface element. Black centre medallion and delta frame support base distinguish this part. 2600 watts of heat and standard plug-in ends mean this burner can be installed on almost any range with similar plug in ends. The delta frame provides a stronger base and helps prevent excessive heat from warping the burner.
● 5 Turn
● 2600 Watts
● 240 Volts
● Delta Bracket
● Black Medallion
● 5 Turn
● 2600 Watts
● 240 Volts
● Delta Bracket
● Black Medallion
Weight : 0.761500 lbs
Dimension : 8.267700 x 5.511800 x 2.322800
The following parts are replaced by this product
- 74001781
- MP26MA
- SU306
No more associated models for this part.
DIY Replace the Chromalox MP26MA 8" Electric Stove Range Cooktop Top Burner Unit
1. Make sure your electricity is shut off before you begin the replacement process.
2. Remove the two screws in the back of the range and pull the old burner unit out of its housing.
3. Once the old unit has been removed, disconnect the wire connections from the back of the burner unit.
4. Take the new Chromalox MP26MA 8" Electric Stove Range Cooktop Top Burner Unit and connect it to the wiring in the back of the range.
5. Secure the new unit in place using the two screws removed earlier.
6. Once the unit is secured in place, turn the power back on.
7. Plug the new unit into the 240V outlet, and then turn the power switch on to test that the new top burner unit is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Make sure your electricity is shut off before you begin the replacement process.
2. Remove the two screws in the back of the range and pull the old burner unit out of its housing.
3. Once the old unit has been removed, disconnect the wire connections from the back of the burner unit.
4. Take the new Chromalox MP26MA 8" Electric Stove Range Cooktop Top Burner Unit and connect it to the wiring in the back of the range.
5. Secure the new unit in place using the two screws removed earlier.
6. Once the unit is secured in place, turn the power back on.
7. Plug the new unit into the 240V outlet, and then turn the power switch on to test that the new top burner unit is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review