Whirlpool Appliance

The Dishwasher Insulation Shield helps keep the noise level in your kitchen to a minimum. In order to access the shield, you'll need to pull the dishwasher out of the cabinet. ... You'll first disconnect the fill line and the drain hose underneath your sink. Then remove the screws that hold the dishwasher to the cabinet and pull the dishwasher out. You'll then use a pair of needle nose pliers to remove the rivets holding the old shield, making sure to keep the rivets so you can re-use them when installing the new shield. Replacing this part will require basic hand tools, but no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the dishwasher's water supply below the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Insulation Shield• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Range Surface Burner Cap Set includes 5 range burner caps that fit on top of the burner heads of your range. The burner cap protects the burner head from spills and helps ...spread out the burner flame for even heating. This set of 5 black caps range in size with the largest measuring 4" in diameter. Replacing this part will require no disassembly or repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (5) Range Surface Burner Cap Set• No tools required for installation Read More Read Less

This Range Oven Outer Door Glass replaces the heat-resistant outer glass panel of your oven’s door window. This glass covers the outer-most part of the oven’s door and all ...ows you to view food items as they cook inside. This part is specifically designed to be used with black appliances. Replacing this part will require basic handtools and some disassembly of the oven. Previous repair experience will be helpful but is not necessary. Remember to unplug the oven or shut off the house circuit breaker for the appliance before installing this part. Caution: The oven door may feel heavy; 2 people may be required to safely lift the oven door to replace the outer glass. Handle glass with care to avoid breakage.This part requires oversized handling fees for delivery.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Oven Outer Door Glass• Tools Needed: Multi screwdriver Read More Read Less

The Electric Range Terminal Block is located on the back of your range where the power cord attaches to the appliance. If your appliance is no longer receiving power, replacin ...g this part may alleviate the issue. Note: This part does not include the power cord or mounting hardware. Installing this kit will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Consider replacing your appliance’s power cord (item PT220) at the same time you make this repair. You may also need the mounting hardware (item WP488130).Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Terminal Block• Tools Needed: Multi screwdriver Read More Read Less

This Refrigerator Evaporator Fan Motor circulates the cold air from the freezer into the fresh foods compartment of your refrigerator. You'll need to replace this part if it h ...as shorted out and is no longer cooling the appliance properly.When the evaporator fan fails, it often generates a lot of noise in the freezer area. Note that to access the part, you'll have to remove the shelving from the freezer and the inside back panel. This part also includes an adapter wire, which you may need to use during the installation depending on the design of your appliance. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Evaporator Fan Motor• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Whirlpool W11546066 CNTRL-ELEC+CORE makes it easy to take control of your kitchen with this intuitive, touch-activated electronic and core control unit. The sleek stainles ...s steel finish will look great in any kitchen, while the powerful system lets you control all aspects of your cooking—from temperatures and cook times to oven features and settings. With accurate temperature sensors and a digital display, you can easily monitor your food's progress. Not only that, but you can also customize your settings for each rack and oven, allowing for maximum efficiency and convenience. Make cooking and baking easier than ever with the Whirlpool W11546066 CNTRL-ELEC+CORE! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

The Dryer Drum Belt circles the dryer’s drum and attaches it to the motor to create constant motion during the drying cycle. If your dryer’s motor is running but the drum ...isn't turning, replacing this part may alleviate the issue. To access the part, first lift up the lint screen cover and remove the two screws. If you have the type of lint screen that has the cover built in, just pull it out and then remove the screws. Next, take a putty knife around the edge of the top of your dryer and find the release clips--press these in to release the top of the dryer so you can swing it open. The front panel also needs to be removed to replace the belt. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drum Belt• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This Dryer 4-Way Side Vent Kit allows heat to safely vent from the side and bottom of your appliance during the drying cycle. This is an accessory that can be used across seve ...ral dryer brands with lint screens in the front; check to see if your model number is compatible. This kit creates several placement possibilities and installation alternatives for your dryer’s ventilation exhaust. Installing this accessory will require basic hand tools and novice repair experience.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Dryer 4-Way Side Vent Kit• Tools Needed: Multi screwdriver Read More Read Less