Whirlpool Appliance

This Top Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the soleno ...ids are damaged and water isn't coming in, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. To access the part, after shutting off the water supply, remove the hot and cold fill hoses (usually labeled "H" and "C") at the back of the machine from the valve. Be sure to set a towel down to catch any water. You'll then remove the top panel of the washer. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The SxS Refrigerator Glass Shelf is a sturdy glass surface that sits above your crisper drawers in compatible brand refrigerators. The glass shelf fits directly into the exist ...ing white plastic border to prevent spills from seeping through. This part measures 31" W x 18" D. Replacing the shelf will not require tools, disassembly of the appliance or repair experience.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Glass Shelf• No tools required for installation Read More Read Less

This Dishwasher Impeller and Seal Kit is for the pump in your dishwasher. If your pump is damaged or you aren't getting any water pressure, replacing this part may alleviate t ...he issue. Remove the lower rack of your dishwasher and take out the spray arm nut by turning it counter-clockwise to access the part. When removing the old gasket, be sure to clean out any left behind residue. This kit includes the Face Seal-seat, Face Seal-head carbon, washer and the impeller assembly. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. You must also turn off the water supply underneath the sink before installation. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help reduce limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Impeller Kit• Tools Needed: Multi screwdriver, torque 15 driver, adjustable wrench, 1/4" nut driver Read More Read Less

The Range Temperature Sensor measures the oven temperature. If your oven isn't holding the correct temperature, replacing the sensor may alleviate this issue. This sensor repl ...aces many long tipped oven sensors and includes instructions and additional plugs to replace the original. To access the part, take the access panel off the back of the range and set it aside. Disconnect the sensor's wiring harness at the back of the oven. Then open the oven door, remove the racks, and remove the screws at the back of the oven holding the sensor in. This kit includes (2) adapters if needed. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Temperature Sensor Kit• Tools Needed: Phillips-Head screwdriver Read More Read Less

Electronic clock assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of wall ovens.

W11462455 is an original equipment manufactured (OEM) part. Maintain your dishwasher with the W11462455 Pump Base, a reliable replacement part designed for optimal performance .... This durable component ensures efficient water circulation and drainage, maintaining your appliance's functionality and longevity. Compatible with a variety of leading brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this pump base is an essential part for your dishwasher repair or maintenance needs. Crafted with high-quality materials, it provides a seamless fit and easy installation, making it an ideal choice for both DIY enthusiasts and professional technicians. Ensure your dishwasher operates smoothly and effectively with this essential pump base replacement. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.