Magic Chef Appliance Parts

The Gas Dryer Igniter Kit is a flat-style igniter assembly that can be used to replace both a round or flat igniter in your appliance. The igniter lights the gas burner to hea ...t the appliance during the drying cycle. This kit includes (1) igniter assembly, (1) bracket, (2) wire nuts, (1) bolt and installation instructions. Note that the igniter is very fragile and must be handled with care. You'll remove the top and front panels of the dryer to access the part. Replacing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Dryer Igniter Kit• Tools Needed: Multi screwdriver, putty knife Read More Read Less

The SxS Refrigerator Door Gasket, White, is a new rubber door seal measuring 31-1/2" W x 41" H. If your refrigerator’s door doesn’t close properly or you can feel cold air ... escaping the appliance, replacing the rubber gasket may alleviate these issues. Note that a refrigerator's original door seal may compress over time, causing the refrigerator to work harder to maintain a constant, cool temperature. Frost may accumulate inside the appliance as a result of this issue. Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Gasket, White• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Gas Range Burner Spark Igniter is a metal conductor with ceramic insulation that delivers an electrical discharge from the spark module to the gas burner, igniting the ga ...s and lighting the flame. If the burner of your appliance no longer lights, replacing this part may alleviate the issue. Be mindful not to lose the two burner wires inside the appliance when you detach them from the old burner head. To install the new part, simply insert it into the burner head and secure it with two screws. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure you shut off the gas to the range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Burner Spark Igniter• Tools Needed: Multi screwdriver, strap wrench Read More Read Less

The Range Temperature Sensor measures the oven temperature. If your oven isn't holding the correct temperature, replacing the sensor may alleviate this issue. This sensor repl ...aces many long tipped oven sensors and includes instructions and additional plugs to replace the original. To access the part, take the access panel off the back of the range and set it aside. Disconnect the sensor's wiring harness at the back of the oven. Then open the oven door, remove the racks, and remove the screws at the back of the oven holding the sensor in. This kit includes (2) adapters if needed. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Temperature Sensor Kit• Tools Needed: Phillips-Head screwdriver Read More Read Less

This Top Load Washer Thrust Bearing Kit agitates the washer during use and drains the drum. If there is a loud noise during the wash cycle, replacing this part may alleviate t ...he issue. This kit includes the (1) pulley, (1) washer, (1) thrust bearing, (2) upper race washers, (1) lower race washer, and the instruction sheet. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Thrust Bearing Kit• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

Whirlpool WPW10259868 ELMNT-SURF i It quickly reaches the desired temperature, so you can start cooking your food in no time. The element is easy to install. . We're your #1 s ...ource for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

W11533213-includeCORE is an original equipment manufactured (OEM) part. Enhance the efficiency of your refrigerator with this high-quality electronic control board, designed s ...pecifically for Whirlpool and compatible with several leading brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This circuit board is essential for managing various fridge functions, ensuring optimal performance and reliability. Its durable construction promises long-lasting service, reducing the need for frequent replacements. Easily installed, this part is perfect for DIY repairs, allowing you to restore your appliance quickly and effectively. Whether you’re troubleshooting issues or performing routine maintenance, this control board is a vital component for maintaining a well-functioning refrigerator. Maintain your appliance with this dependable part today to keep your food fresh and your energy bills low. Read More Read Less