11034152 Bosch Refrigerator Water Filter

How to replace the Bosch 11034152 Water Filter

If you are looking to replace the Bosch 11034152 water filter, then you come to the right place. In this guide, we will be taking you through a step-by-step process for replacing your filter.

Before you start, there are a few safety precautions to keep in mind:

-Turn off the water main before removing any parts
-Wear protective gear when handling new parts
-Always ground the water system when working with electricity

Now that we have reviewed the safety precautions, let's get into the steps for replacing the filter.

STEP 1: Shut off the water main.

The first step is to shut off the water main, so turn the knob to the position. This will stop the supply of water to the filter.

STEP 2: Disconnect the filter.

Next, disconnect the filter from the rest of the water system by unscrewing the cap and removing the filter. Make sure to have a bucket or cloth ready to collect any water that spills while you are doing this.

STEP 3: Remove the old filter.

Now it is time to remove the old filter. Grab the plastic housing of the filter and twist it counter-clockwise until it comes off.

STEP 4: Install the new filter.

Once the old filter is out of the way, take the new filter and install it. Be sure to put the plastic housing back on the filter and turn it clockwise until it is secured.

STEP 5: Reconnect the filter.

Finally, reconnect the filter to the rest of the water system by screwing the cap back on.

Once the filter is secured and all the parts are connected, it is time to turn on the water main.

And that's it! You have successfully replaced the Bosch 11034152 water filter. We hope this guide was helpful and if you have any questions or need help, do not hesitate to contact us.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.