00744881 Bosch Dishwasher Drain Hose

1. Unplug the dishwasher from its power source. Make sure the electricity is off to the outlet before continuing.

2. Locate the drain hose connection at the bottom of the Bosch dishwasher. The hose is typically easy to spot, as it runs from the dishwasher to a garbage disposal or sink.

3. Detach the old drain hose. This can be done by squeezing the clamps that secure it to the dishwasher and then removing the hose.

4. Once the old drain hose is removed, take the new replacement hose and attach one end to the dishwasher’s drainage port.

5. Attach the other end of the drain hose to either the garbage disposal or sink, depending on where the previous one was connected. Secure the hose with the clamps that came with it.

6. Check to make sure the new drain hose is properly secured. If everything looks good, plug the dishwasher back in and turn the electricity to the appliance back on.

7. Test out the new drain hose by running a short cycle of the dishwasher. Make sure there are no leakages from the hose or the dishwasher.

8. When finished, turn the power off to the dishwasher and unplug it from the outlet.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.