00648812 Bosch Oven Holder

Step 1: Gather the Tools

You will need the following tools to replace the Bosch 00648812 Support: Philips screwdriver, flathead screwdriver, needle-nose pliers, wirecutters, and a utility knife.

Step 2: Remove the Old Support

Using the Philips screwdriver, remove the screws that secure the old Bosch 00648812 Support to the wall. Carefully pull the support off the wall, ensuring that you do not damage the surrounding area.

Step 3: Install the New Support

Position the new Bosch 00648812 Support in the same location as the old one. Secure it using the screws you previously removed.

Step 4: Attach the Connectors

Use the needle-nose pliers to attach the appropriate connectors to the new support. Then use the wirecutters to cut the excess wiring.

Step 5: Test the Functionality

Securely plug any necessary appliances into the new Bosch 00648812 Support and test its functionality.

Step 6: Clean Up

Once you are satisfied with the performance of the new support, dispose of any packaging materials as well as the old support.

Congratulations! You have now successfully replaced the Bosch 00648812 Support.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.