Online Sale!
100% Guaranteed Genuine Parts
00494772 Bosch Dishwasher Sealing
00494772 Bosch Dishwasher Sealing
Weight : 0.736100 lbs
Dimension : 10.866100 x 9.566900 x 0.984200
About this product
00494772 Bosch Dishwasher Sealing
Weight : 0.736100 lbs
Dimension : 10.866100 x 9.566900 x 0.984200
The following parts are replaced by this product
- 494772
No more associated models for this part.
DIY Step-by-Step Guide for Replacing the 00494772 Bosch Dishwasher Door Gasket
Tools Required: Flathead screwdriver, Phillips head screwdriver, new 00494772 Bosch Dishwasher Door Gasket
Step 1: Unplug the dishwasher from the power source. It is important to make sure the dishwasher is completely unplugged before you attempt to replace the gasket.
Step 2: Take off the lower adjustable toe kick plate by pressing it inwards and using a flathead screwdriver to gently pry it off.
Step 3: Open the dishwasher door, then locate the four screws along the base of the inner panel trim. Unscrew those screws using a Phillips head screwdriver, and then remove the inner panel trim.
Step 4: Now you can access the door gasket. Take off the old gasket and discard it.
Step 5: Place the new 00494772 Bosch Dishwasher Door Gasket in the same position as the old one. Make sure it is installed properly, with no creases or gaps.
Step 6: Replace the screws along the base of the inner panel trim. Tighten them securely.
Step 7: Finally, replace the lower adjustable toe kick plate and plug the dishwasher back into the power source.
You have now successfully replaced your 00494772 Bosch Dishwasher Door Gasket!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Required: Flathead screwdriver, Phillips head screwdriver, new 00494772 Bosch Dishwasher Door Gasket
Step 1: Unplug the dishwasher from the power source. It is important to make sure the dishwasher is completely unplugged before you attempt to replace the gasket.
Step 2: Take off the lower adjustable toe kick plate by pressing it inwards and using a flathead screwdriver to gently pry it off.
Step 3: Open the dishwasher door, then locate the four screws along the base of the inner panel trim. Unscrew those screws using a Phillips head screwdriver, and then remove the inner panel trim.
Step 4: Now you can access the door gasket. Take off the old gasket and discard it.
Step 5: Place the new 00494772 Bosch Dishwasher Door Gasket in the same position as the old one. Make sure it is installed properly, with no creases or gaps.
Step 6: Replace the screws along the base of the inner panel trim. Tighten them securely.
Step 7: Finally, replace the lower adjustable toe kick plate and plug the dishwasher back into the power source.
You have now successfully replaced your 00494772 Bosch Dishwasher Door Gasket!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review