00486767 Bosch Oven Range Door Seal Gasket 30 Inch
Upgrade your range today with the 00486767 Bosch Range Door Seal Gasket - 30 Inch. This oven door seal is designed with maximum tension and heat resistance for easy installation and reliable performance. It is a genuine OEM part and made of high-quality materials for a durable, long-lasting seal. This replacement gasket helps restore your appliance to its original performance. Compatible with select Bosch Series 800 and Benchmark ovens, this gasket helps keep heat inside for energy efficiency and improved cooking results. Simply snap this seal into place for a quick, easy installation process. Keep your range running like new with the 00486767 Bosch Range Door Seal Gasket - 30 Inch. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Upgrade your range today with the 00486767 Bosch Range Door Seal Gasket - 30 Inch. This oven door seal is designed with maximum tension and heat resistance for easy installation and reliable performance. It is a genuine OEM part and made of high-quality materials for a durable, long-lasting seal. This replacement gasket helps restore your appliance to its original performance. Compatible with select Bosch Series 800 and Benchmark ovens, this gasket helps keep heat inside for energy efficiency and improved cooking results. Simply snap this seal into place for a quick, easy installation process. Keep your range running like new with the 00486767 Bosch Range Door Seal Gasket - 30 Inch. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- 35-00-655
- 486767
- 241901
Instructions on How to Replace a 30-Inch Bosch Range Door Seal Gasket (00486767)
1. Turn off the power supply to your range at the breaker box and turn off the gas supply.
2. Pull the range away from the wall and remove both the lower and upper back panels; these are held in place with screws.
3. Disconnect the wire harness from the main control board located inside the upper cabinet area at the top of the range.
4. Locate the four screws holding the door in place at the bottom of the range and remove them with a screwdriver.
5. Carefully lift the door off of the range and place it on a flat surface.
6. Inspect the seal gasket surrounding the oven door and, using a putty knife, scrape away any residue or dirt that has accumulated around the seal.
7. Remove the old seal by carefully lifting up one edge and pulling it off.
8. Take the new seal (00486767) and fit it around the door frame, making sure that all the edges are firmly in place.
9. Place the door back on the range and secure in place with the four screws.
10. Connect the wire harness to the main controller board, replace the back panels and move the range back into place.
11. Turn the power and gas back on and test the oven to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the power supply to your range at the breaker box and turn off the gas supply.
2. Pull the range away from the wall and remove both the lower and upper back panels; these are held in place with screws.
3. Disconnect the wire harness from the main control board located inside the upper cabinet area at the top of the range.
4. Locate the four screws holding the door in place at the bottom of the range and remove them with a screwdriver.
5. Carefully lift the door off of the range and place it on a flat surface.
6. Inspect the seal gasket surrounding the oven door and, using a putty knife, scrape away any residue or dirt that has accumulated around the seal.
7. Remove the old seal by carefully lifting up one edge and pulling it off.
8. Take the new seal (00486767) and fit it around the door frame, making sure that all the edges are firmly in place.
9. Place the door back on the range and secure in place with the four screws.
10. Connect the wire harness to the main controller board, replace the back panels and move the range back into place.
11. Turn the power and gas back on and test the oven to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
