E20F01-031600 Avanti Cooktop Coil Switch
Part #: AVP E20F01-031600
Coil switch works with some Avanti Products models of cooktops.
Coil switch works with some Avanti Products models of cooktops.
Write Your Own Review
DIY Replacement Instructions for Avanti Products E20F01-031600 Avanti Cooktop Coil Switch
It is not uncommon to experience problems with your Avanti Products E20F01-031600 Avanti cooktop coil switch. Fortunately, replacing the switch is relatively easy and inexpensive. Follow these simple steps to replace the switch and get your cooktop back up and running.
Materials Needed:
1. A new switch (Avanti Products E20F01-031600 or compatible replacement model)
2. Screwdriver
3. Needle-nose pliers
4. Wire cutters
Step 1: Unplug the power cord from the outlet.
Step 2: Locate the coil switch and remove the screws securing it in place.
Step 3: Carefully remove the existing switch from the cooktop. You may need to use needle-nose pliers to disconnect the two wires. It's important to remember which wire was connected to which terminal.
Step 4: Install the new switch. First attach the two wires to the terminals, making sure they are connected in the same way they were with the old switch. Secure the switch in place with the screws.
Step 5: Plug the power cord back in to the outlet and test the cooktop to ensure the new switch is working properly.
Replacing your Avanti Products E20F01-031600 Avanti cooktop coil switch is a straightforward process that should take no more than 30 minutes. Please keep in mind that this is an electrical repair, so please exercise caution and turn off the power before beginning.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
It is not uncommon to experience problems with your Avanti Products E20F01-031600 Avanti cooktop coil switch. Fortunately, replacing the switch is relatively easy and inexpensive. Follow these simple steps to replace the switch and get your cooktop back up and running.
Materials Needed:
1. A new switch (Avanti Products E20F01-031600 or compatible replacement model)
2. Screwdriver
3. Needle-nose pliers
4. Wire cutters
Step 1: Unplug the power cord from the outlet.
Step 2: Locate the coil switch and remove the screws securing it in place.
Step 3: Carefully remove the existing switch from the cooktop. You may need to use needle-nose pliers to disconnect the two wires. It's important to remember which wire was connected to which terminal.
Step 4: Install the new switch. First attach the two wires to the terminals, making sure they are connected in the same way they were with the old switch. Secure the switch in place with the screws.
Step 5: Plug the power cord back in to the outlet and test the cooktop to ensure the new switch is working properly.
Replacing your Avanti Products E20F01-031600 Avanti cooktop coil switch is a straightforward process that should take no more than 30 minutes. Please keep in mind that this is an electrical repair, so please exercise caution and turn off the power before beginning.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
