E20F01-020100-01 Avanti Cooktop
Part #: AVP E20F01-020100-01
Cooktop works with some Avanti Products models of stoves / ovens / ranges.
Cooktop works with some Avanti Products models of stoves / ovens / ranges.
Write Your Own Review
Replacing an Avanti Products Range Cooktop
1. Unplug the current cooktop from the power source.
2. Remove the existing screws holding the cooktop in place with a screwdriver. To do this, carefully remove each screw and set aside.
3. Carefully lift the cooktop away from the range. Be sure to exercise caution as the cooktop can be quite heavy and may require two people to lift it.
4. Place the new cooktop on the range and align it with the existing cutout.
5. Replace the screws that were removed earlier and tighten them securely with a screwdriver or ratchet wrench.
6. Plug the new cooktop into a power source.
7. Test the new cooktop by turning the burners on and off.
8. Enjoy your new Avanti Products Range Cooktop!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the current cooktop from the power source.
2. Remove the existing screws holding the cooktop in place with a screwdriver. To do this, carefully remove each screw and set aside.
3. Carefully lift the cooktop away from the range. Be sure to exercise caution as the cooktop can be quite heavy and may require two people to lift it.
4. Place the new cooktop on the range and align it with the existing cutout.
5. Replace the screws that were removed earlier and tighten them securely with a screwdriver or ratchet wrench.
6. Plug the new cooktop into a power source.
7. Test the new cooktop by turning the burners on and off.
8. Enjoy your new Avanti Products Range Cooktop!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
