CK30-09N Avanti Compact Kitchen Connector
Part #: AVP CK30-09N
Connector works with some Avanti Products models of compact kitchens.
Connector works with some Avanti Products models of compact kitchens.
Write Your Own Review
DIY Replacing the CK30-09N Avanti Products Compact Kitchen Connector
Are you looking to replace the CK30-09N Avanti Products compact kitchen connector in your home? Have no fear! This DIY guide will walk you through the steps of successfully completing this task.
Tools Needed:
-Phillips head screw driver
-Wire cutters
-Needle nose pliers
-Replacement part (CK30-09N Avanti Products Compact Kitchen Connector)
Step 1: Shut off the main water supply to the kitchen sink.
Step 2: Turn off the Hot and Cold valves under the sink and disconnect the hose from the valves.
Step 3: Remove the existing connector by unscrewing the Phillips head screws.
Step 4: Cut the wire using the wire cutters and use the needle nose pliers to pull off the existing connector.
Step 5: Connect the new CK30-09N Avanti Products Compact Kitchen Connector by first attaching the hoses to the Hot and Cold valves. Secure with the screws provided in the connector kit.
Step 6: Turn on the main water supply valve and test the connection to ensure it is functioning properly.
Congratulations - you have now successfully replaced the CK30-09N Avanti Products Compact Kitchen Connector in your kitchen!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the CK30-09N Avanti Products compact kitchen connector in your home? Have no fear! This DIY guide will walk you through the steps of successfully completing this task.
Tools Needed:
-Phillips head screw driver
-Wire cutters
-Needle nose pliers
-Replacement part (CK30-09N Avanti Products Compact Kitchen Connector)
Step 1: Shut off the main water supply to the kitchen sink.
Step 2: Turn off the Hot and Cold valves under the sink and disconnect the hose from the valves.
Step 3: Remove the existing connector by unscrewing the Phillips head screws.
Step 4: Cut the wire using the wire cutters and use the needle nose pliers to pull off the existing connector.
Step 5: Connect the new CK30-09N Avanti Products Compact Kitchen Connector by first attaching the hoses to the Hot and Cold valves. Secure with the screws provided in the connector kit.
Step 6: Turn on the main water supply valve and test the connection to ensure it is functioning properly.
Congratulations - you have now successfully replaced the CK30-09N Avanti Products Compact Kitchen Connector in your kitchen!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
