2004A Airsled DUAL AIRSLED + O/S2 120V
Part #: AER 2004A
This is a genuine OEM item made by Airsled. NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
This is a genuine OEM item made by Airsled. NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
Write Your Own Review
Step 1: Turn off the power to the Frigidaire range. To do this, locate and disconnect the electrical plug.
Step 2: Lift the main top off of the range. There will be four screws at the sides of the unit that need to be unscrewed before you can lift the main top up and off.
Step 3: Once the screws are removed, lift the top of the range up and away from the oven. Make sure you have a safe place to set it and keep it out of the way.
Step 4: Place the new main top oven (the 318223640 MAIN TOP OS2) onto the range. Make sure that the tabs line up and the screws holes match.
Step 5: Secure the new main top oven to the range by tightening the four screws that were previously removed.
Step 6: Once the screws are tightened, turn the power back on to the Frigidaire range.
Step 7: Test the range to make sure everything is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Lift the main top off of the range. There will be four screws at the sides of the unit that need to be unscrewed before you can lift the main top up and off.
Step 3: Once the screws are removed, lift the top of the range up and away from the oven. Make sure you have a safe place to set it and keep it out of the way.
Step 4: Place the new main top oven (the 318223640 MAIN TOP OS2) onto the range. Make sure that the tabs line up and the screws holes match.
Step 5: Secure the new main top oven to the range by tightening the four screws that were previously removed.
Step 6: Once the screws are tightened, turn the power back on to the Frigidaire range.
Step 7: Test the range to make sure everything is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
