Online Sale!
100% Guaranteed Genuine Parts
WPW10337934 Whirlpool Spring Assembly
The Dishwasher Door Spring applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. Use caution when installing the door spring because the spring is under tension and could snap. To access the part, you'll need to remove the screws that mount the dishwasher to the counter top. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Door Spring
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Door Spring
• Tools Needed: Multi screwdriver
Weight : 0.063400 lbs
Dimension : 6.535400 x 1.181100 x 1.141700
Compatible Brands
About this product
The Dishwasher Door Spring applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. Use caution when installing the door spring because the spring is under tension and could snap. To access the part, you'll need to remove the screws that mount the dishwasher to the counter top. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Door Spring
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Door Spring
• Tools Needed: Multi screwdriver
Weight : 0.063400 lbs
Dimension : 6.535400 x 1.181100 x 1.141700
The following parts are replaced by this product
- 8524473
- W10337934
No more associated models for this part.
Replacing the Whirlpool WPW10337934 SPRING: A DIY Guide
If your Whirlpool washer isn’t operating correctly, it might be time to replace the Whirlpool WPW10337934 Spring. This part is responsible for providing tension for the washer lid, helping keep it secure during operation. Luckily, it’s a relatively simple repair that doesn't require any special tools!
Step 1: Unplug the washer from the wall outlet and shut off the water supply.
Step 2: Remove the access panel located on the back of the washer.
Step 3: Locate the spring attached to the lid hinge.
Step 4: Carefully remove the old spring using needle-nose pliers.
Step 5: Attach the new spring to the lid hinge in the same place as the old spring. Make sure to ensure the shape of the spring is secure and the ends are firmly attached.
Step 6: Re-attach the access panel and plug the washer back in.
Step 7: Turn the water supply back on and test out the new spring.
Congratulations, you’ve successfully replaced the Whirlpool WPW10337934 Spring! With this DIY project, you’ll save time and money on hiring a professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Whirlpool washer isn’t operating correctly, it might be time to replace the Whirlpool WPW10337934 Spring. This part is responsible for providing tension for the washer lid, helping keep it secure during operation. Luckily, it’s a relatively simple repair that doesn't require any special tools!
Step 1: Unplug the washer from the wall outlet and shut off the water supply.
Step 2: Remove the access panel located on the back of the washer.
Step 3: Locate the spring attached to the lid hinge.
Step 4: Carefully remove the old spring using needle-nose pliers.
Step 5: Attach the new spring to the lid hinge in the same place as the old spring. Make sure to ensure the shape of the spring is secure and the ends are firmly attached.
Step 6: Re-attach the access panel and plug the washer back in.
Step 7: Turn the water supply back on and test out the new spring.
Congratulations, you’ve successfully replaced the Whirlpool WPW10337934 Spring! With this DIY project, you’ll save time and money on hiring a professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review