Online Sale!
100% Guaranteed Genuine Parts
WPW10300022 Whirlpool Refrigerator Ice Maker Assembly
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 8-cube replacement ice maker is compatible with many refrigerator models with in-door ice and water dispensers. If the coating of your appliance’s current ice maker is flaking off, or if components inside the assembly are no longer functioning properly, replacing the ice maker assembly may alleviate these issues. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Weight : 5.640300 lbs
Dimension : 14.450000 x 7.600000 x 7.250000
Compatible Brands
About this product
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This 8-cube replacement ice maker is compatible with many refrigerator models with in-door ice and water dispensers. If the coating of your appliance’s current ice maker is flaking off, or if components inside the assembly are no longer functioning properly, replacing the ice maker assembly may alleviate these issues. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver
Weight : 5.640300 lbs
Dimension : 14.450000 x 7.600000 x 7.250000
The following parts are replaced by this product
- W10122556
- W10300022
No more associated models for this part.
1. Unplug the refrigerator from the electrical outlet and turn off the water supply valve to the ice maker.
2. Remove the two screws that attach the ice maker to the freezer wall.
3. Once the screws are removed, carefully remove the ice maker assembly from the refrigerator and lay it on a flat surface.
4. Use a flathead screwdriver to loosen and remove the clip on the side of the ice maker assembly that holds the wiring harness in place.
5. Disconnect the wiring harness from the ice maker assembly by pressing down on the wire release tab and pulling gently on the wiring harness.
6. Take the new WPW10300022 Whirlpool Refrigerator Ice Maker Assembly and align it with the mounting holes in the freezer wall.
7. Secure the ice maker to the freezer wall using the two screws that were removed earlier.
8. Plug the wiring harness into the new ice maker. Secure it in place by pressing the clip back onto the wiring harness.
9. Turn on the water supply valve to the ice maker and plug the refrigerator back into the electrical outlet.
10. Wait 24 hours for the ice maker to begin producing ice before use.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the two screws that attach the ice maker to the freezer wall.
3. Once the screws are removed, carefully remove the ice maker assembly from the refrigerator and lay it on a flat surface.
4. Use a flathead screwdriver to loosen and remove the clip on the side of the ice maker assembly that holds the wiring harness in place.
5. Disconnect the wiring harness from the ice maker assembly by pressing down on the wire release tab and pulling gently on the wiring harness.
6. Take the new WPW10300022 Whirlpool Refrigerator Ice Maker Assembly and align it with the mounting holes in the freezer wall.
7. Secure the ice maker to the freezer wall using the two screws that were removed earlier.
8. Plug the wiring harness into the new ice maker. Secure it in place by pressing the clip back onto the wiring harness.
9. Turn on the water supply valve to the ice maker and plug the refrigerator back into the electrical outlet.
10. Wait 24 hours for the ice maker to begin producing ice before use.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review