Online Sale!
100% Guaranteed Genuine Parts
WP4391960 Whirlpool Dryer Heating Element
The Dryer Heating Element is a replacement part for the heating element coils that dry your clothes. If your dryer is not heating as expected, replacing this part may alleviate the issue. First check for a blown thermal fuse on the blower housing before replacing the heating element. To access the part, remove the back panel from your dryer. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver, wire splicing tool
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver, wire splicing tool
Weight : 3.192500 lbs
Dimension : 17.716500 x 6.299200 x 3.976300
Compatible Brands
About this product
The Dryer Heating Element is a replacement part for the heating element coils that dry your clothes. If your dryer is not heating as expected, replacing this part may alleviate the issue. First check for a blown thermal fuse on the blower housing before replacing the heating element. To access the part, remove the back panel from your dryer. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver, wire splicing tool
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Heating Element
• Tools Needed: Multi screwdriver, wire splicing tool
Weight : 3.192500 lbs
Dimension : 17.716500 x 6.299200 x 3.976300
No more associated models for this part.
Step 1: First, switch off the power by unplugging the Whirlpool dryer from the wall socket or turning off the circuit breaker.
Step 2: Open the dryer and check whether the front bulkhead is hot. If there is no heat, the heating element WP4391960 needs to be replaced.
Step 3: Take out all the internal components of the dryer, such as the drum, lint filter, and control panel, in order to gain access to the heating element.
Step 4: Remove the wires connected to the old element and unscrew the mounting screws.
Step 5: Install the new heating element WP4391960 in place, and make sure that it is securely fastened with the mounting screws.
Step 6: Reconnect the wires to the element, and be careful not to cross any wires.
Step 7: Place all the internal components back into the dryer and close the dryer door.
Step 8: Plug the dryer back into the wall socket or turn on the circuit breaker and turn on the dryer.
Step 9: Check that the heating element is functioning correctly and the dryer is heating up properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Open the dryer and check whether the front bulkhead is hot. If there is no heat, the heating element WP4391960 needs to be replaced.
Step 3: Take out all the internal components of the dryer, such as the drum, lint filter, and control panel, in order to gain access to the heating element.
Step 4: Remove the wires connected to the old element and unscrew the mounting screws.
Step 5: Install the new heating element WP4391960 in place, and make sure that it is securely fastened with the mounting screws.
Step 6: Reconnect the wires to the element, and be careful not to cross any wires.
Step 7: Place all the internal components back into the dryer and close the dryer door.
Step 8: Plug the dryer back into the wall socket or turn on the circuit breaker and turn on the dryer.
Step 9: Check that the heating element is functioning correctly and the dryer is heating up properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review