Online Sale!

100% Guaranteed Genuine Parts

WP27001006 Whirlpool Drive Belt

Part #: WPL WP27001006
This Top Load Washer Drive Belt causes your washer to spin properly during the washing cycle. If your washer pumps but does not spin or if the drum spins slowly, replacing this part may alleviate these issues. This part is medium “v”- shaped for three-speed washers. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Drive Belt
• Tools Needed: Multi screwdriver


Weight : 0.738600 lbs
Dimension : 9.251900 x 7.047200 x 1.574800
Ship to home
In stock and ready to ship
Store Pickup In stock and ready for pickup!
Ok Edit
Enter a valid ZIP code
In stock
Out of stock
Special Price $26.39 Regular Price $29.32 10% off

Compatible Brands

Compatible with Compatible with Compatible with Compatible with

About this product

This Top Load Washer Drive Belt causes your washer to spin properly during the washing cycle. If your washer pumps but does not spin or if the drum spins slowly, replacing this part may alleviate these issues. This part is medium “v”- shaped for three-speed washers. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Drive Belt
• Tools Needed: Multi screwdriver


Weight : 0.738600 lbs
Dimension : 9.251900 x 7.047200 x 1.574800

The following parts are replaced by this product

  1. 40053601
  2. 40053606
  3. 27001006
No more associated models for this part.
Replace Your Whirlpool WP27001006 Drive Belt

1. Unplug the dryer from the wall before beginning any maintenance work.

2. Open the dryer's cabinet door and locate the drive belt.

3. Use a Phillips head screwdriver to remove the screws that hold the cabinet's front panel in place.

4. Lift the front panel up until it is perpendicular to the floor.

5. Grab each side of the drive belt and pull it gently away from the motor pulleys.

6. Insert the new drive belt around the motor pulleys, making sure it lines up correctly with the grooved wheel.

7. Slide the belt over towards the drum and make sure it is properly aligned.

8. Reinstall the front panel and Secure it into place with the Phillips head screws.

9. Plug the dryer back into the wall outlet.

10. Turn the dryer on to test it out. If the belt is spinning properly, your repair is now complete!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review
You're reviewing:WP27001006 Whirlpool Drive Belt
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.