Online Sale!
100% Guaranteed Genuine Parts
W11445850 Whirlpool Door Switch
Whirlpool W11445850 SWITCH We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.795600 lbs
Dimension : 12.047200 x 10.905500 x 4.015700
Compatible Brands
About this product
Whirlpool W11445850 SWITCH We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.795600 lbs
Dimension : 12.047200 x 10.905500 x 4.015700
The following parts are replaced by this product
- 67006422
- 12466115SP
- WP12466115SP
No more associated models for this part.
DIY Instructions for Replacing a Whirlpool W11445850 Switch
1. Locate the switch and power off the appliance. Unplug the appliance or turn off the circuit breaker if it is hardwired.
2. Use a screwdriver to remove the surrounding parts to gain access to the switch. This may include screws, mounting plates, or other components.
3. Disconnect the wires from the switch by unscrewing the connectors and then taking out the switch. Make a note of where each wire went for easier installation.
4. Install the new Whirlpool W11445850 switch, connecting each wire in its original position. Secure the switch with screws.
5. Reinstall the surrounding parts and test the appliance.
6. Once the new switch is installed and functioning properly, turn the power back on and resume using the appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Locate the switch and power off the appliance. Unplug the appliance or turn off the circuit breaker if it is hardwired.
2. Use a screwdriver to remove the surrounding parts to gain access to the switch. This may include screws, mounting plates, or other components.
3. Disconnect the wires from the switch by unscrewing the connectors and then taking out the switch. Make a note of where each wire went for easier installation.
4. Install the new Whirlpool W11445850 switch, connecting each wire in its original position. Secure the switch with screws.
5. Reinstall the surrounding parts and test the appliance.
6. Once the new switch is installed and functioning properly, turn the power back on and resume using the appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review