Online Sale!
100% Guaranteed Genuine Parts
W11107275 Whirlpool Range Control Panel Cooling Fan
This Range Control Panel Cooling Fan circulates air through the control panel area to cool the controls. The cooling fan is located under the range. To access the part, remove the control panel's lower cover and then detach the control panel. When preparing the new fan for installation, you'll transfer the seal from the old fan to the new. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Control Panel Cooling Fan
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Control Panel Cooling Fan
• Tools Needed: Multi screwdriver
Weight : 4.100700 lbs
Dimension : 19.000000 x 5.370000 x 5.500000
Compatible Brands
About this product
This Range Control Panel Cooling Fan circulates air through the control panel area to cool the controls. The cooling fan is located under the range. To access the part, remove the control panel's lower cover and then detach the control panel. When preparing the new fan for installation, you'll transfer the seal from the old fan to the new. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Control Panel Cooling Fan
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Control Panel Cooling Fan
• Tools Needed: Multi screwdriver
Weight : 4.100700 lbs
Dimension : 19.000000 x 5.370000 x 5.500000
The following parts are replaced by this product
- W10162259
- W10842388
- W10860981
- W11226777
No more associated models for this part.
Step 1: Gather the Tools and Parts Needed
You will need the following tools to replace a FAN-BLWR-ASSY:
- Phillips screwdriver
- Flathead screwdriver
- Replacement FAN-BLWR-ASSY
Step 2: Disconnect Power
To ensure your safety, disconnect power from the appliance before beginning any repairs.
Step 3: Remove the Old FAN-BLWR-ASSY
Using a Phillips and flathead screwdriver, remove the screws that secure the old FAN-BLWR-ASSY and pull it out of the appliance.
Step 4: Install the New FAN-BLWR-ASSY
Insert the new FAN-BLWR-ASSY into the appliance and fasten it with the screws.
Step 5: Reconnect Power
Reconnect the power cord to the appliance and turn on the power.
Step 6: Test the Appliance
Test the appliance to make sure the new FAN-BLWR-ASSY is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
You will need the following tools to replace a FAN-BLWR-ASSY:
- Phillips screwdriver
- Flathead screwdriver
- Replacement FAN-BLWR-ASSY
Step 2: Disconnect Power
To ensure your safety, disconnect power from the appliance before beginning any repairs.
Step 3: Remove the Old FAN-BLWR-ASSY
Using a Phillips and flathead screwdriver, remove the screws that secure the old FAN-BLWR-ASSY and pull it out of the appliance.
Step 4: Install the New FAN-BLWR-ASSY
Insert the new FAN-BLWR-ASSY into the appliance and fasten it with the screws.
Step 5: Reconnect Power
Reconnect the power cord to the appliance and turn on the power.
Step 6: Test the Appliance
Test the appliance to make sure the new FAN-BLWR-ASSY is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review