Online Sale!
100% Guaranteed Genuine Parts
279366 Whirlpool Sensor Kit
This Dryer Moisture Sensor Bar monitors the moisture levels of the clothing during the drying cycle and communicates a signal to the control board indicating when the clothes are dry and the cycle can finish. If your appliance shuts off too early or continues running after the clothes are already dry, replacing this part may alleviate the issue. Includes the sensor bars, pads and clips. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. The sensors are located in the plastic lint screen housing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Moisture Sensor Bar
• Tools Needed: Multi screwdriver, pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Moisture Sensor Bar
• Tools Needed: Multi screwdriver, pliers
Weight : 0.304500 lbs
Dimension : 7.637700 x 5.866100 x 0.944800
Compatible Brands
About this product
This Dryer Moisture Sensor Bar monitors the moisture levels of the clothing during the drying cycle and communicates a signal to the control board indicating when the clothes are dry and the cycle can finish. If your appliance shuts off too early or continues running after the clothes are already dry, replacing this part may alleviate the issue. Includes the sensor bars, pads and clips. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. The sensors are located in the plastic lint screen housing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Moisture Sensor Bar
• Tools Needed: Multi screwdriver, pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Moisture Sensor Bar
• Tools Needed: Multi screwdriver, pliers
Weight : 0.304500 lbs
Dimension : 7.637700 x 5.866100 x 0.944800
The following parts are replaced by this product
- 348861
- 3976479
No more associated models for this part.
Replacing the Whirlpool 279366 P1-ELECTRODE
Instructions
Step 1: Unplug your appliance from the wall outlet.
Use caution when unplugging because you may come into contact with live parts.
Step 2: Remove the cabinet from the appliance.
Refer to the owner’s manual for instructions on how to remove the cabinet.
Step 3: Locate and remove the Whirlpool 279366 P1-ELECTRODE.
The electrode should be located on the backside of the dryer or washing machine.
Step 4: Disconnect the wires leading to the electrode.
Carefully disconnect the wires from the electrode so that you don’t damage them.
Step 5: Install the new electrode.
Make sure you connect the wires to the same area on the new electrode as the old one.
Step 6: Reassemble the appliance.
Follow the instructions in the owner’s manual in order to put everything back together.
Step 7: Plug the appliance back in and test it out.
Plug the appliance back in and make sure that it is functioning properly. If all is good, you can enjoy a fully functioning appliance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
Step 1: Unplug your appliance from the wall outlet.
Use caution when unplugging because you may come into contact with live parts.
Step 2: Remove the cabinet from the appliance.
Refer to the owner’s manual for instructions on how to remove the cabinet.
Step 3: Locate and remove the Whirlpool 279366 P1-ELECTRODE.
The electrode should be located on the backside of the dryer or washing machine.
Step 4: Disconnect the wires leading to the electrode.
Carefully disconnect the wires from the electrode so that you don’t damage them.
Step 5: Install the new electrode.
Make sure you connect the wires to the same area on the new electrode as the old one.
Step 6: Reassemble the appliance.
Follow the instructions in the owner’s manual in order to put everything back together.
Step 7: Plug the appliance back in and test it out.
Plug the appliance back in and make sure that it is functioning properly. If all is good, you can enjoy a fully functioning appliance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review