Online Sale!
80-54356-00 U-Line Water Valve Assembly
80-54356-00 U-Line Water Valve Assembly
Weight : 0.401000 lbs
Dimension : 6.141700 x 4.803100 x 1.889700
Compatible Brands
About this product
80-54356-00 U-Line Water Valve Assembly
Weight : 0.401000 lbs
Dimension : 6.141700 x 4.803100 x 1.889700
The following parts are replaced by this product
- 2552A
- 76006
- 80-54624-00
- 80-40029-00
- 76010
- S80-54356-00
- 2552-A
No more associated models for this part.
DIY Guide for Replacing the 80-54356-00 U-Line Refrigerator Water Valve Assembly
1. Gather the necessary tools and supplies before you begin. You will need a Phillips head screwdriver, adjustable wrench, replacement U-Line 80-54356-00 refrigerator water valve assembly, and a bucket to catch any water that may spill.
2. Turn off the water supply to the refrigerator. This is usually located under your kitchen sink, underneath the access panel on the wall, or at the water line coming into your house.
3. Open the refrigerator door and locate the old water valve. This is usually towards the back of the fridge on the right side.
4. Disconnect the two hoses attached to the old water valve. This can be done by loosening the hose clamps with an adjustable wrench. Carefully pull each hose away from the valve, then tilt the valve downward so that any remaining water will drain into the bucket.
5. Remove the screws holding the old valve in place with a Phillips head screwdriver. Carefully pull the old water valve out of its mounting bracket.
6. Insert the new water valve into the mounting bracket. Secure it with the screws you removed from the old valve.
7. Reconnect the hoses to the new water valve and make sure they are tightened securely with the adjustable wrench.
8. Turn the water supply back on, and check for any leaks.
9. Test the new water valve by running some cold water through it. You should hear a buzzing sound as the water flows through the valve.
With these steps, you should have successfully replaced the 80-54356-00 U-Line refrigerator water valve assembly in your own home. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the necessary tools and supplies before you begin. You will need a Phillips head screwdriver, adjustable wrench, replacement U-Line 80-54356-00 refrigerator water valve assembly, and a bucket to catch any water that may spill.
2. Turn off the water supply to the refrigerator. This is usually located under your kitchen sink, underneath the access panel on the wall, or at the water line coming into your house.
3. Open the refrigerator door and locate the old water valve. This is usually towards the back of the fridge on the right side.
4. Disconnect the two hoses attached to the old water valve. This can be done by loosening the hose clamps with an adjustable wrench. Carefully pull each hose away from the valve, then tilt the valve downward so that any remaining water will drain into the bucket.
5. Remove the screws holding the old valve in place with a Phillips head screwdriver. Carefully pull the old water valve out of its mounting bracket.
6. Insert the new water valve into the mounting bracket. Secure it with the screws you removed from the old valve.
7. Reconnect the hoses to the new water valve and make sure they are tightened securely with the adjustable wrench.
8. Turn the water supply back on, and check for any leaks.
9. Test the new water valve by running some cold water through it. You should hear a buzzing sound as the water flows through the valve.
With these steps, you should have successfully replaced the 80-54356-00 U-Line refrigerator water valve assembly in your own home. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review