D510502LG Speed Queen Light Gray Lint Filter Cover

DIY Speed Queen D510502LG Filter Lint Cover Replacement

Are your dryer’s lint filter cover cracked or damaged? Replacing the Speed Queen D510502LG Lint Filter Cover is a simple DIY task you can accomplish in no time. With some basic tools and our step-by-step instructions, you’ll have that filter cover replaced in no time and your dryer working like new again.

Tools Needed:

-Phillips head screwdriver

-Tape Measure

-Pair of needle nose pliers

Instructions:

1. Unplug your dryer from the power outlet.

2. Remove the lint filter cover by pulling it straight up and off.

3. Locate the screws securing the filter cover to the top of the dryer.

4. Remove the screws with a Phillips head screwdriver.

5. Measure the lint filter cover and purchase a replacement cover at your local hardware store.

6. Place the replacement filter cover on the top of the dryer.

7. Secure the filter cover with the screws removed in Step 4.

8. Substitute the lint filter back into the filter cover and use a pair of needle nose pliers if needed.

9. Plug the dryer back into the outlet and test the dryer.

By following the steps above, you should be able to quickly and easily replace the Speed Queen D510502LG filter cover on your dryer.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.