DG47-00021B Samsung Oven Range Stovetop Triple Radiant Surface Heater Element
Triple radiant surface heater element for some models of Samsung oven range stovetops.
Triple radiant surface heater element for some models of Samsung oven range stovetops.
Write Your Own Review
DIY: How to Replace the DG47-00021B Samsung Oven Range Stovetop Triple Radiant Surface Heater Element
Replacing the DG47-00021B Samsung oven range stovetop triple radiant surface heater element is a fairly straightforward task. With just a few basic tools and a little bit of time, you can have your heater element up and running again in no time. Here’s what you’ll need to get started:
• Phillips screwdriver
• Flathead screwdriver
• New DG47-00021B Samsung oven range stovetop triple radiant surface heater element
Step 1: Unplug your oven from the power source to ensure there is no electricity running through the appliance.
Step 2: Carefully remove the mounting screws from the back wall of the oven. These are usually found at the corners of the back panel. Make sure you are using the correct type of screws, as some Samsung models might require Torx instead of Phillips head screws.
Step 3: Remove the wiring harnesses that are connected to your old heater element. Make sure to label each wire so you know where to reconnect them when installing your new heater element.
Step 4: Carefully pull out the old element and discard it in the proper manner.
Step 5: Take your new element and carefully connect the wiring harnesses to the appropriate terminals on the back of the element. Make sure to double-check your connections and confirm they are secure before proceeding.
Step 6: Place the heater element into the oven and re-secure the mounting screws.
Step 7: Plug the oven back into the power source and turn it on. The heater element should be working properly.
You’ve done it! Replacing the DG47-00021B Samsung oven range stovetop triple radiant surface heater element is an easy and cost-effective way to extend the life of your oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the DG47-00021B Samsung oven range stovetop triple radiant surface heater element is a fairly straightforward task. With just a few basic tools and a little bit of time, you can have your heater element up and running again in no time. Here’s what you’ll need to get started:
• Phillips screwdriver
• Flathead screwdriver
• New DG47-00021B Samsung oven range stovetop triple radiant surface heater element
Step 1: Unplug your oven from the power source to ensure there is no electricity running through the appliance.
Step 2: Carefully remove the mounting screws from the back wall of the oven. These are usually found at the corners of the back panel. Make sure you are using the correct type of screws, as some Samsung models might require Torx instead of Phillips head screws.
Step 3: Remove the wiring harnesses that are connected to your old heater element. Make sure to label each wire so you know where to reconnect them when installing your new heater element.
Step 4: Carefully pull out the old element and discard it in the proper manner.
Step 5: Take your new element and carefully connect the wiring harnesses to the appropriate terminals on the back of the element. Make sure to double-check your connections and confirm they are secure before proceeding.
Step 6: Place the heater element into the oven and re-secure the mounting screws.
Step 7: Plug the oven back into the power source and turn it on. The heater element should be working properly.
You’ve done it! Replacing the DG47-00021B Samsung oven range stovetop triple radiant surface heater element is an easy and cost-effective way to extend the life of your oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
