Online Sale!
100% Guaranteed Genuine Parts
DE81-04001A Samsung Range Hood Halogen Bulb Replacement Service Kit
Halogen bulb kit works with some Dacor models of range vent hoods.
Weight : 0.000000 lbs
Compatible Brands
About this product
Halogen bulb kit works with some Dacor models of range vent hoods.
Weight : 0.000000 lbs
The following parts are replaced by this product
- 700975
No more associated models for this part.
Step 1: Unplug the Samsung Range Hood from the electrical outlet.
Step 2: Remove the lamp cover located at the top of the hood by turning the two screws that hold the cover in place a quarter turn counterclockwise.
Step 3: Remove the Halogen bulb from the range hood by grasping the base of the bulb and gently pulling it out.
Step 4: Install the new DE81-04001A replacement halogen bulb by inserting the base into the socket, then turning it a quarter turn clockwise to secure it in place.
Step 5: Put the lamp cover back onto the top of the range hood and secure it with the screws by turning them a quarter turn clockwise.
Step 6: Plug the Samsung Range Hood back in to the electrical outlet and replace any vent ducting that was disconnected when the lamp cover was removed.
Step 7: Turn on the power and test the Range Hood to ensure the bulb is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the lamp cover located at the top of the hood by turning the two screws that hold the cover in place a quarter turn counterclockwise.
Step 3: Remove the Halogen bulb from the range hood by grasping the base of the bulb and gently pulling it out.
Step 4: Install the new DE81-04001A replacement halogen bulb by inserting the base into the socket, then turning it a quarter turn clockwise to secure it in place.
Step 5: Put the lamp cover back onto the top of the range hood and secure it with the screws by turning them a quarter turn clockwise.
Step 6: Plug the Samsung Range Hood back in to the electrical outlet and replace any vent ducting that was disconnected when the lamp cover was removed.
Step 7: Turn on the power and test the Range Hood to ensure the bulb is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review