DA82-02869A Samsung Refrigerator Water Filter Case Assembly
Water Filter Case Assembly works with some models of Samsung Refrigerators
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Water Filter Case Assembly works with some models of Samsung Refrigerators
Write Your Own Review
The following parts are replaced by this product
- DA97-14365H
Step 1: Unplug your Samsung refrigerator from the wall outlet.
Step 2: Locate the DA82-02869A Samsung Refrigerator Water Filter Case Assembly. This is usually found on the lower left side of the refrigerator.
Step 3: Open the grille and locate the filter housing. Remove the two screws from the base of the filter housing.
Step 4: Slide the housing out of the grille and turn it to the side to remove.
Step 5: Unscrew the cap on the water filter assembly and pull out the old filter.
Step 6: Insert the new water filter into the housing and screw the cap on the assembly back in place.
Step 7: Reinsert the housing into the grille and replace the two screws at the base of the housing.
Step 8: Reconnect the power cord to the refrigerator and plug it in.
Step 9: Run cold water through the fresh water dispenser for one minute to activate the new filter.
Step 10: Discard the old filter and enjoy the taste of filtered water provided by your new DA82-02869A Samsung Refrigerator Water Filter Case Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Locate the DA82-02869A Samsung Refrigerator Water Filter Case Assembly. This is usually found on the lower left side of the refrigerator.
Step 3: Open the grille and locate the filter housing. Remove the two screws from the base of the filter housing.
Step 4: Slide the housing out of the grille and turn it to the side to remove.
Step 5: Unscrew the cap on the water filter assembly and pull out the old filter.
Step 6: Insert the new water filter into the housing and screw the cap on the assembly back in place.
Step 7: Reinsert the housing into the grille and replace the two screws at the base of the housing.
Step 8: Reconnect the power cord to the refrigerator and plug it in.
Step 9: Run cold water through the fresh water dispenser for one minute to activate the new filter.
Step 10: Discard the old filter and enjoy the taste of filtered water provided by your new DA82-02869A Samsung Refrigerator Water Filter Case Assembly!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
