41-411 Robertshaw Ignitor
Part #: ROB 41-411
Hot Surface Furnace Ignitor
4 1/2" Lead Length
The Robertshaw 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment.
The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (Crystar™) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection.
NOTE: All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC.
Replaces:
BARNETT BRASS 661928 Exact
NORTON 271N Functional
REPAIR CLINIC 1164346 Functional
RHEEM 62-22868-82 Exact
SUPCO SIG-108 Functional
UNI-LINE 63477 Exact Uni-Line UPC number. Number may appear preceded by Uni-Line's vendor i.d. number, 662013.ex. 66201312345.
W.W. GRAINGER 5JA30 Exact
WHITE-RODGERS 767A-383 Functional
4 1/2" Lead Length
The Robertshaw 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment.
The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (Crystar™) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection.
NOTE: All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC.
Replaces:
BARNETT BRASS 661928 Exact
NORTON 271N Functional
REPAIR CLINIC 1164346 Functional
RHEEM 62-22868-82 Exact
SUPCO SIG-108 Functional
UNI-LINE 63477 Exact Uni-Line UPC number. Number may appear preceded by Uni-Line's vendor i.d. number, 662013.ex. 66201312345.
W.W. GRAINGER 5JA30 Exact
WHITE-RODGERS 767A-383 Functional
Hot Surface Furnace Ignitor
4 1/2" Lead Length
The Robertshaw 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment.
The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (Crystar™) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection.
NOTE: All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC.
Replaces:
BARNETT BRASS 661928 Exact
NORTON 271N Functional
REPAIR CLINIC 1164346 Functional
RHEEM 62-22868-82 Exact
SUPCO SIG-108 Functional
UNI-LINE 63477 Exact Uni-Line UPC number. Number may appear preceded by Uni-Line's vendor i.d. number, 662013.ex. 66201312345.
W.W. GRAINGER 5JA30 Exact
WHITE-RODGERS 767A-383 Functional
4 1/2" Lead Length
The Robertshaw 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment.
The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (Crystar™) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection.
NOTE: All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC.
Replaces:
BARNETT BRASS 661928 Exact
NORTON 271N Functional
REPAIR CLINIC 1164346 Functional
RHEEM 62-22868-82 Exact
SUPCO SIG-108 Functional
UNI-LINE 63477 Exact Uni-Line UPC number. Number may appear preceded by Uni-Line's vendor i.d. number, 662013.ex. 66201312345.
W.W. GRAINGER 5JA30 Exact
WHITE-RODGERS 767A-383 Functional
Write Your Own Review
DIY Steps to Replace Your 41-411 Robertshaw Hot Surface Furnace Ignitor, 4-1/2" Lead Wire
1. Turn off your furnace's power source. In order to replace the ignitor, you need to ensure the power source to the furnace is off. You can either flip the circuit breaker or remove the fuse that controls electricity to the furnace.
2. Disconnect any electrical wires connected to the existing ignitor. Typically, you will find a black wire and a white wire. Loosen the screws and pull off the wires from the existing ignitor.
3. Unscrew the screws that secure the existing ignitor to the furnace. Depending on how your furnace is set up, there may be clips holding the ignitor in place as well.
4. Take out the existing ignitor by carefully pulling it off the furnace.
5. Connect the new 41-411 Robertshaw Hot Surface Furnace Ignitor, 4-1/2" Lead Wire to the furnace. Place it in the slot and secure it with the screws.
6. Reattach the wire connections back to the new ignitor. Secure the screws tightly so there are no loose connections.
7. Turn the furnace's power source back on and verify the new ignitor is operational. You should see a spark at the end of the ignitor when the furnace turns on.
8. Replace the cover on the furnace and make sure all screws are tightened securely.
Following these easy steps will ensure you are able to replace the 41-411 Robertshaw Hot Surface Furnace Ignitor, 4-1/2" Lead Wire safely and correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off your furnace's power source. In order to replace the ignitor, you need to ensure the power source to the furnace is off. You can either flip the circuit breaker or remove the fuse that controls electricity to the furnace.
2. Disconnect any electrical wires connected to the existing ignitor. Typically, you will find a black wire and a white wire. Loosen the screws and pull off the wires from the existing ignitor.
3. Unscrew the screws that secure the existing ignitor to the furnace. Depending on how your furnace is set up, there may be clips holding the ignitor in place as well.
4. Take out the existing ignitor by carefully pulling it off the furnace.
5. Connect the new 41-411 Robertshaw Hot Surface Furnace Ignitor, 4-1/2" Lead Wire to the furnace. Place it in the slot and secure it with the screws.
6. Reattach the wire connections back to the new ignitor. Secure the screws tightly so there are no loose connections.
7. Turn the furnace's power source back on and verify the new ignitor is operational. You should see a spark at the end of the ignitor when the furnace turns on.
8. Replace the cover on the furnace and make sure all screws are tightened securely.
Following these easy steps will ensure you are able to replace the 41-411 Robertshaw Hot Surface Furnace Ignitor, 4-1/2" Lead Wire safely and correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
