All Categories

The Stand Mixer Speed Control Board impacts the desired speed level of the appliance. If the contacts inside the control board (also called the speed control plate) aren't clo ...sing and your mixer is running loud or irregularly, or if the contacts have failed and your mixer is no longer turning on at all, replacing the control plate may alleviate these issues. To access the part remove the back cover of the mixer and the screws from the trim band. Remove the wires from the seal of the mixer in order to take the spring off of the speed control plate. Make sure you hook the spring with your needle nose pliers securely to remove. Disconnect the wires from the phase control board. You'll then be able to remove the upper two screws holding in the existing speed control plate. Note: These upper two screws are where you adjust the speed of your mixer; they should measure 3/8" from the back of their post to the back of the control board. Replacing this part will require basic hand tools and disassembly of the stand mixer. Previous repair experience will be helpful but is not necessary. You must unplug the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Board• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Stand Mixer Gear Kit includes both the attachment drive and beveled gears for Kitchenaid® Professional 5 and 6 Mixers. If the teeth of the existing gears are worn or dama ...ged or if your mixer's motor is on but nothing is moving, you may need to replace these parts. Replacing this kit will require basic hand tools, considerable disassembly of the stand mixer and some repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed. Helpful Tip: You may need to clean, repair and re-grease the entire gearcase to properly install the new parts. Recommended Item: If your mixer has the older-style plastic transmission housing, we recommend upgrading the part to the stronger metal gearcase housing (item 8212396) at the same time you complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Gear Kit• Tools Needed: Multi screwdriver and snap-ring pliers Read More Read Less

The KitchenAid® Flat Beater is perfect for quickly and thoroughly mashing potatoes, mixing cake batter, cookie dough and more in your KitchenAid® stand mixer. This Flat Beat ...er replacement part is nylon coated for durability and is top-rack dishwasher safe.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) KitchenAid® Flat Beater• No tools required for installation Read More Read Less

This Stand Mixer Speed Control Lever allows you to turn on and regulate the mixing speed of your appliance. If the lever of your stand mixer is damaged or no longer functionin ...g, you can easily replace it with this part. Replacing this part will require basic hand tools, some disassembly of the mixer and novice repair experience. You must unplug the mixer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Lever• Tools Needed: Multi screwdriver Read More Read Less

The Stand Mixer Transmission Case Gasket is located in between the two halves of the cases and prevents grease from leaking from the gear housing during operation. If the exis ...ting part is torn or damaged and you notice grease leaking from the mixer, replacing this part may alleviate the issue. Installing this part will require basic tools, disassembly of the stand mixer and some repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Transmission Case Gasket• Tools Needed: Multi screwdriver and hammer Read More Read Less

MOTOR

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.