Online Sale!
100% Guaranteed Genuine Parts
AJQ73413811 LG Outer Tub Assembly
LG Electronics Sears Kenmore Clothes Washer Washing Machine Rear Outer Tub Assembly 3045ER0048B
Weight : 0.000000 lbs
Compatible Brands
About this product
LG Electronics Sears Kenmore Clothes Washer Washing Machine Rear Outer Tub Assembly 3045ER0048B
Weight : 0.000000 lbs
The following parts are replaced by this product
- 3045ER0048B
Replacing the AAN73431001 LG Washer Cabinet Base Assembly
Instructions
1. Unplug the power cord from the outlet and shut off the water supply for the washer.
2. Remove the existing cabinet base assembly by unscrewing the 4 screws around the baseplate and remove the 4 screws from the bottom of the washer.
3. Lift the washer up to access the bottom side of the cabinet base assembly.
4. Disconnect the water inlet hoses from the backside of the washer and remove them from the cabinet base assembly.
5. Unscrew the 2 screws that hold the rear brackets for the cabinet base assembly.
6. Remove the old cabinet base assembly and discard it.
7. Place the new AAN73431001 LG Washer Cabinet Base Assembly onto the floor and center it with the washer.
8. Align the holes on the cabinet base assembly with the screws on the washer and secure it with the 4 screws.
9. Attach the rear brackets for the cabinet base assembly with the 2 screws.
10. Reconnect the water inlet hoses to the backside of the washer and the new cabinet base assembly.
11. Plug the power cord into the outlet and turn on the water supply for the washer.
12. Test the machine to make sure the new cabinet base assembly is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
1. Unplug the power cord from the outlet and shut off the water supply for the washer.
2. Remove the existing cabinet base assembly by unscrewing the 4 screws around the baseplate and remove the 4 screws from the bottom of the washer.
3. Lift the washer up to access the bottom side of the cabinet base assembly.
4. Disconnect the water inlet hoses from the backside of the washer and remove them from the cabinet base assembly.
5. Unscrew the 2 screws that hold the rear brackets for the cabinet base assembly.
6. Remove the old cabinet base assembly and discard it.
7. Place the new AAN73431001 LG Washer Cabinet Base Assembly onto the floor and center it with the washer.
8. Align the holes on the cabinet base assembly with the screws on the washer and secure it with the 4 screws.
9. Attach the rear brackets for the cabinet base assembly with the 2 screws.
10. Reconnect the water inlet hoses to the backside of the washer and the new cabinet base assembly.
11. Plug the power cord into the outlet and turn on the water supply for the washer.
12. Test the machine to make sure the new cabinet base assembly is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review